Experienced Manufacturers
Production plant area of more than 10,000 square feet, more than 100 people construction team.
Hotline
0769-22277627Industry introduction
Amorphous material is a new type of alloy material introduced in the 1970s, it adopts the international advanced ultra-rapid cooling technology to form a solid thin strip with a thickness of 0.02 ~ 0.04mm by directly cooling the liquid metal at a cooling rate of 1X106℃ / S, and obtains an amorphous alloy organisation with the characteristics of short-range ordering and long-range disordering in the combination of atomic arrangement, and the alloy has a number of unique performance characteristics, such as excellent This alloy has many unique performance characteristics, such as excellent magnetism, corrosion resistance, wear resistance, high hardness, high strength, high resistivity and so on.
Overview of the treatment programme
For the amorphous material exhaust VOCs treatment technology, now in line with environmental emission requirements, and play a role in reducing costs and efficiency of the treatment technology, is the use of wind reduction and thickening + combustion method of treatment technology is more economical and energy-saving. It is recommended to use: wet jet washing (multi-pipe) + dry filter + reduced wind enrichment + catalytic combustion combination of governance, governance can meet the emission requirements of standards!
Process flow
Wet jet washing (multi-tube) + dry filtration + activated carbon adsorption and concentration + catalytic combustion process (integrated system) process treatment. Organic waste gas is collected through the pipeline, and enters the pretreatment wet jet tower to remove paint dew, acidity and particulate matter purification. After purification, the gas is introduced into the dry filter to remove particles and harmful substances on the activated carbon adsorption, and the organic waste gas is then sent to the activated carbon adsorption bed device, and the VOCs components in the waste gas are absorbed by the activated carbon and then discharged to the atmosphere in compliance with the standards.
When the activated carbon adsorption bed is saturated by electric heating high temperature (80-100 ℃ C) desorption of VOCs substances, desorption of high concentrations of organic waste gas directly into the catalytic combustion co, through the accelerated oxidation of high concentrations of waste gas by precious metals, in ( 250-350 ℃) high temperature purification and oxidation of harmless carbon dioxide (CO2) and water vapour (H20) and meet the standards of emission into the atmosphere.
Other treatment technology solutions
Low concentration and small air volume of carbon fibre composite waste gas can be used: spray tower, uv photolysis purifier, activated carbon adsorption and other single or multiple combinations of processes for treatment;
High concentration of small air volume carbon fibre composite waste gas can be used: pretreatment + zeolite molecular sieve + catalytic combustion, pretreatment + zeolite molecular sieve + RTO thermal storage incinerator, a single catalytic combustion device or a single RTO thermal storage incinerator and so on;
High concentration and large air volume carbon fibre composites exhaust gas can be used: pretreatment + zeolite rotor concentration + catalytic combustion or pretreatment + zeolite rotor concentration + RTO thermal storage incinerator and so on.
Reason for choice
Production plant area of more than 10,000 square feet, more than 100 people construction team.
A number of engineers and technicians, most of whom have more than 10 years of experience and have worked on numerous projects.
Adoption of the latest domestic and international treatment technology, with high treatment efficiency.
According to the actual needs of the project, free to customise the corresponding exhaust gas treatment solutions, all regions of the country package to meet the emission standards.
Passed the third level of construction enterprise qualification and a number of technical patents...
1000+ project experience, more than 100 industry partners, complete environmental protection qualification.
Contact - Ways
Contact informationCatalytic combustion machine is a dry filter + adsorption de...
Activated carbon adsorption and desorption + CO catalytic co...
Zeolite rotor concentration + RTO regenerative incinerator c...
Zeolite rotor concentration + CO catalytic combustion proces...
CO catalytic combustion + TO direct combustion furnace proce...
For low concentration and low air volume of waste gas treatm...
Industry introduction
Amorphous material is a new type of alloy material introduced in the 1970s, it adopts the international advanced ultra-rapid cooling technology to form a solid thin strip with a thickness of 0.02 ~ 0.04mm by directly cooling the liquid metal at a cooling rate of 1X106℃ / S, and obtains an amorphous alloy organisation with the characteristics of short-range ordering and long-range disordering in the combination of atomic arrangement, and the alloy has a number of unique performance characteristics, such as excellent This alloy has many unique performance characteristics, such as excellent magnetism, corrosion resistance, wear resistance, high hardness, high strength, high resistivity and so on.
Overview of the treatment programme
For the amorphous material exhaust VOCs treatment technology, now in line with environmental emission requirements, and play a role in reducing costs and efficiency of the treatment technology, is the use of wind reduction and thickening + combustion method of treatment technology is more economical and energy-saving. It is recommended to use: wet jet washing (multi-pipe) + dry filter + reduced wind enrichment + catalytic combustion combination of governance, governance can meet the emission requirements of standards!
Process flow
Wet jet washing (multi-tube) + dry filtration + activated carbon adsorption and concentration + catalytic combustion process (integrated system) process treatment. Organic waste gas is collected through the pipeline, and enters the pretreatment wet jet tower to remove paint dew, acidity and particulate matter purification. After purification, the gas is introduced into the dry filter to remove particles and harmful substances on the activated carbon adsorption, and the organic waste gas is then sent to the activated carbon adsorption bed device, and the VOCs components in the waste gas are absorbed by the activated carbon and then discharged to the atmosphere in compliance with the standards.
When the activated carbon adsorption bed is saturated by electric heating high temperature (80-100 ℃ C) desorption of VOCs substances, desorption of high concentrations of organic waste gas directly into the catalytic combustion co, through the accelerated oxidation of high concentrations of waste gas by precious metals, in ( 250-350 ℃) high temperature purification and oxidation of harmless carbon dioxide (CO2) and water vapour (H20) and meet the standards of emission into the atmosphere.
Other treatment technology solutions
Low concentration and small air volume of carbon fibre composite waste gas can be used: spray tower, uv photolysis purifier, activated carbon adsorption and other single or multiple combinations of processes for treatment;
High concentration of small air volume carbon fibre composite waste gas can be used: pretreatment + zeolite molecular sieve + catalytic combustion, pretreatment + zeolite molecular sieve + RTO thermal storage incinerator, a single catalytic combustion device or a single RTO thermal storage incinerator and so on;
High concentration and large air volume carbon fibre composites exhaust gas can be used: pretreatment + zeolite rotor concentration + catalytic combustion or pretreatment + zeolite rotor concentration + RTO thermal storage incinerator and so on.