Experienced Manufacturers
Production plant area of more than 10,000 square feet, more than 100 people construction team.
Hotline
0769-22277627Industry Introduction
Plastic film is a common plastic product. It is usually made of polyethylene polypropylene polyvinyl chloride polystyrene polyethylene terephthalate nylon polyvinyl acetate and other resins. Mainly used as packaging materials and functional films, widely used in food electronics medicine building materials and other chemical and other industries, including films used for food packaging materials.
Pollution hazards
Plastic film industry coater exhaust is mainly coated and its subsequent drying process produces high concentration, high temperature, high heat recovery value of the vocs exhaust, the main components are benzene, ethyl acetate and various esters.
Overview of the treatment programme
For the plastic film coating machine process exhaust VOCs treatment technology, now in line with environmental emission requirements, and play a cost-effective treatment technology, is the use of regenerative incineration method of treatment technology is more economical and energy-saving. Suggested use: wet jet washing + regenerative thermal incinerator (RTO) combination of governance, governance can meet the emission requirements of standards!
Process flow
Wet jet washing (multi-tube) + Regenerative Thermal Oxidiser (RTO process) is used for treatment. Organic waste gas is collected through the pipeline, and enters the pre-treatment wet jet tower to remove harmful gases and particles for purification. After purification, the gas is introduced into the regenerative thermal incinerator, which heats up the organic waste gas to 760 degrees Celsius, so that the organic waste gas is burned between 760-860 degrees Celsius, and purified and oxidised into harmless carbon dioxide (CO2) and water vapour (H20) at high temperature, and then discharged into the atmosphere in compliance with the standards.
Other treatment technology
Low concentration and small air volume pharmaceutical plant exhaust can be used: spray tower, uv photolysis purifier, activated carbon adsorption and other single or multiple combinations of processes for treatment;
High concentration of small air volume pharmaceutical plant exhaust can be used: pretreatment + zeolite molecular sieve + catalytic combustion; pretreatment + zeolite molecular sieve + RTO thermal storage incinerator, a single catalytic combustion device or a single RTO thermal storage incinerator and so on;
High concentration and large air volume of pharmaceutical plant waste gas can be used: pretreatment + zeolite rotor concentration + catalytic combustion or pretreatment + zeolite rotor concentration + RTO thermal storage incinerator and so on.
Reason for choice
Production plant area of more than 10,000 square feet, more than 100 people construction team.
A number of engineers and technicians, most of whom have more than 10 years of experience and have worked on numerous projects.
Adoption of the latest domestic and international treatment technology, with high treatment efficiency.
According to the actual needs of the project, free to customise the corresponding exhaust gas treatment solutions, all regions of the country package to meet the emission standards.
Passed the third level of construction enterprise qualification and a number of technical patents...
1000+ project experience, more than 100 industry partners, complete environmental protection qualification.
Contact - Ways
Contact informationCatalytic combustion machine is a dry filter + adsorption de...
Activated carbon adsorption and desorption + CO catalytic co...
Zeolite rotor concentration + RTO regenerative incinerator c...
Zeolite rotor concentration + CO catalytic combustion proces...
CO catalytic combustion + TO direct combustion furnace proce...
For low concentration and low air volume of waste gas treatm...
Industry Introduction
Plastic film is a common plastic product. It is usually made of polyethylene polypropylene polyvinyl chloride polystyrene polyethylene terephthalate nylon polyvinyl acetate and other resins. Mainly used as packaging materials and functional films, widely used in food electronics medicine building materials and other chemical and other industries, including films used for food packaging materials.
Pollution hazards
Plastic film industry coater exhaust is mainly coated and its subsequent drying process produces high concentration, high temperature, high heat recovery value of the vocs exhaust, the main components are benzene, ethyl acetate and various esters.
Overview of the treatment programme
For the plastic film coating machine process exhaust VOCs treatment technology, now in line with environmental emission requirements, and play a cost-effective treatment technology, is the use of regenerative incineration method of treatment technology is more economical and energy-saving. Suggested use: wet jet washing + regenerative thermal incinerator (RTO) combination of governance, governance can meet the emission requirements of standards!
Process flow
Wet jet washing (multi-tube) + Regenerative Thermal Oxidiser (RTO process) is used for treatment. Organic waste gas is collected through the pipeline, and enters the pre-treatment wet jet tower to remove harmful gases and particles for purification. After purification, the gas is introduced into the regenerative thermal incinerator, which heats up the organic waste gas to 760 degrees Celsius, so that the organic waste gas is burned between 760-860 degrees Celsius, and purified and oxidised into harmless carbon dioxide (CO2) and water vapour (H20) at high temperature, and then discharged into the atmosphere in compliance with the standards.
Other treatment technology
Low concentration and small air volume pharmaceutical plant exhaust can be used: spray tower, uv photolysis purifier, activated carbon adsorption and other single or multiple combinations of processes for treatment;
High concentration of small air volume pharmaceutical plant exhaust can be used: pretreatment + zeolite molecular sieve + catalytic combustion; pretreatment + zeolite molecular sieve + RTO thermal storage incinerator, a single catalytic combustion device or a single RTO thermal storage incinerator and so on;
High concentration and large air volume of pharmaceutical plant waste gas can be used: pretreatment + zeolite rotor concentration + catalytic combustion or pretreatment + zeolite rotor concentration + RTO thermal storage incinerator and so on.