Experienced Manufacturers
Production plant area of more than 10,000 square feet, more than 100 people construction team.
Hotline
0769-22277627Industry Introduction
Paint, traditionally known as lacquer in China. The so-called paint is coated on the surface of the object to be protected or decorated, and can form a continuous film firmly attached to the coated object, usually with resin, or oil, or emulsion-based, with or without the addition of pigments, fillers, add the appropriate additives, with organic solvents or water formulated from the viscous liquid.
Pollution Hazard
Oil-based paint or paint in the production process will produce organic waste gas, of which, formaldehyde is a colourless, strong irritating odour gas. Formaldehyde is a colourless gas with a strong irritating odour. It is volatile and highly toxic, benzene is highly toxic, toluene and xylene are low toxicity, and inhalation of a certain amount of benzene, toluene and xylene can cause poisoning, and even damage the haematopoietic system and the nervous system.
Overview of the treatment programme
For the paint factory paint exhaust VOCs treatment technology, now in line with environmental emission requirements, and play a role in reducing costs and efficiency of the treatment technology, is the use of reduced wind concentration + combustion method of treatment technology is more economical and energy-saving and effective. Dry filter + zeolite rotor concentration + catalytic combustion combination of governance, governance can meet the emission requirements of standards!
Process flow
Organic waste gas through the pipeline collection, into the pre-treatment dry filter to remove particles below 1 micron and on the zeolite adsorption of harmful substances, removed organic waste gas is subsequently sent to the zeolite adsorption bed device, the VOCs components in the waste gas is absorbed by the zeolite and discharged into the atmosphere after reaching the standard. When the zeolite adsorption bed is saturated by electric heating at high temperature (100-180 ℃ C) desorption of VOCs substances, desorption of high concentration of organic waste gas directly into the catalytic combustion co, through the accelerated oxidation of high concentration of waste gas by precious metals, in ( 250-380 ℃) high temperature purification and oxidation of harmless carbon dioxide (CO2) and water vapour (H20) and meet the standards of emission into the atmosphere.
Other treatment technology programmes
Low concentration and small air volume printing waste gas can be used: spray tower, uv photolysis purifier, activated carbon adsorption and other single or multiple combinations of processes for treatment;
High concentration of small air volume printing waste gas can be used: pretreatment + zeolite molecular sieve + catalytic combustion, pretreatment + zeolite molecular sieve + RTO regenerative incinerator, a single catalytic combustion device or a single RTO regenerative incinerator and so on;
High concentration and large air volume printing waste gas can be used: pretreatment + zeolite rotor concentration + catalytic combustion or pretreatment + zeolite rotor concentration + RTO thermal storage incinerator and so on.
Reason for choice
Production plant area of more than 10,000 square feet, more than 100 people construction team.
A number of engineers and technicians, most of whom have more than 10 years of experience and have worked on numerous projects.
Adoption of the latest domestic and international treatment technology, with high treatment efficiency.
According to the actual needs of the project, free to customise the corresponding exhaust gas treatment solutions, all regions of the country package to meet the emission standards.
Passed the third level of construction enterprise qualification and a number of technical patents...
1000+ project experience, more than 100 industry partners, complete environmental protection qualification.
Contact - Ways
Contact informationCatalytic combustion machine is a dry filter + adsorption de...
Activated carbon adsorption and desorption + CO catalytic co...
Zeolite rotor concentration + RTO regenerative incinerator c...
Zeolite rotor concentration + CO catalytic combustion proces...
CO catalytic combustion + TO direct combustion furnace proce...
For low concentration and low air volume of waste gas treatm...
Industry Introduction
Paint, traditionally known as lacquer in China. The so-called paint is coated on the surface of the object to be protected or decorated, and can form a continuous film firmly attached to the coated object, usually with resin, or oil, or emulsion-based, with or without the addition of pigments, fillers, add the appropriate additives, with organic solvents or water formulated from the viscous liquid.
Pollution Hazard
Oil-based paint or paint in the production process will produce organic waste gas, of which, formaldehyde is a colourless, strong irritating odour gas. Formaldehyde is a colourless gas with a strong irritating odour. It is volatile and highly toxic, benzene is highly toxic, toluene and xylene are low toxicity, and inhalation of a certain amount of benzene, toluene and xylene can cause poisoning, and even damage the haematopoietic system and the nervous system.
Overview of the treatment programme
For the paint factory paint exhaust VOCs treatment technology, now in line with environmental emission requirements, and play a role in reducing costs and efficiency of the treatment technology, is the use of reduced wind concentration + combustion method of treatment technology is more economical and energy-saving and effective. Dry filter + zeolite rotor concentration + catalytic combustion combination of governance, governance can meet the emission requirements of standards!
Process flow
Organic waste gas through the pipeline collection, into the pre-treatment dry filter to remove particles below 1 micron and on the zeolite adsorption of harmful substances, removed organic waste gas is subsequently sent to the zeolite adsorption bed device, the VOCs components in the waste gas is absorbed by the zeolite and discharged into the atmosphere after reaching the standard. When the zeolite adsorption bed is saturated by electric heating at high temperature (100-180 ℃ C) desorption of VOCs substances, desorption of high concentration of organic waste gas directly into the catalytic combustion co, through the accelerated oxidation of high concentration of waste gas by precious metals, in ( 250-380 ℃) high temperature purification and oxidation of harmless carbon dioxide (CO2) and water vapour (H20) and meet the standards of emission into the atmosphere.
Other treatment technology programmes
Low concentration and small air volume printing waste gas can be used: spray tower, uv photolysis purifier, activated carbon adsorption and other single or multiple combinations of processes for treatment;
High concentration of small air volume printing waste gas can be used: pretreatment + zeolite molecular sieve + catalytic combustion, pretreatment + zeolite molecular sieve + RTO regenerative incinerator, a single catalytic combustion device or a single RTO regenerative incinerator and so on;
High concentration and large air volume printing waste gas can be used: pretreatment + zeolite rotor concentration + catalytic combustion or pretreatment + zeolite rotor concentration + RTO thermal storage incinerator and so on.