Hotline
Experienced Manufacturers
Production plant area of more than 10,000 square feet, more than 100 people construction team.
(physical works cases)
Auto parts factory industry introduction
Automobile factory parts (auto parts) is a kind of product that constitutes the whole unit of the automobile and serves the automobile. There are many kinds of auto parts, with the improvement of people's living standard, people's consumption of automobiles is also more and more, auto parts of this market has become bigger and bigger. In recent years, auto parts manufacturing plants are also developing rapidly.
Auto parts factory pollution hazards
Auto parts factory in the production process will inevitably produce pollution, such as in the process of painting operations, pre-paint treatment of workpieces, electrophoresis and painting. The painting process includes spraying, levelling and baking, in which organic waste gases (VOCs) and overspray paint mist will be generated. The organic solvents in the paint mist, benzene, toluene, xylene and other highly toxic solvents, emitted into the air of the workshop during the operation, and inhaled by workers through the respiratory tract can cause acute and chronic poisoning, mainly causing damage to the central nervous system and haematopoietic system.
Overview of auto parts factory waste treatment programme
For the large air volume of auto parts factory paint exhaust VOCs treatment technology, now in line with environmental emission requirements, and play a cost-effective treatment technology, is the use of combustion method of treatment technology is more economical and energy-saving effective. The use of wet jet washing (multi-pipe) + dry filter + reduced wind concentration + regenerative incinerator RTO combination of governance, governance can meet the emission requirements of standards!
Auto parts factory waste treatment process
Wet jet washing (multi-tube) + dry filtration + zeolite rotor adsorption concentration + catalytic combustion process (integrated system) process treatment. Organic waste gas is collected through the pipeline, and enters the pretreatment wet jet tower to remove paint dew, acidity and particles of purification. After purification, the gas is introduced into the dry filter to remove particles and zeolite adsorption of hazardous substances, and the organic waste gas is then sent to the zeolite adsorption bed device, and the VOCs in the waste gas is absorbed by the zeolite and then discharged to the atmosphere in compliance with the standards. When the zeolite adsorption bed saturated by electric heating high temperature (100-280 ℃ C) desorption of VOCs substances, desorption of high concentrations of organic waste gas directly into the heat storage ceramic body, through the heat storage ceramic body of the organic waste gas temperature to 760 degrees, so that the organic waste gas in the 760-860 degrees between the combustion of high temperature purification and oxidation of harmless carbon dioxide (CO2) and water vapour (H20) and The organic waste gas can be discharged into the atmosphere according to the standard.
Other treatment technology
High concentration of small air volume auto parts factory exhaust can be used: pretreatment + zeolite molecular sieve + catalytic combustion, pretreatment + zeolite molecular sieve + RTO thermal storage incinerator, a single catalytic combustion device or a single RTO thermal storage incinerator and so on;
High concentration and large air volume auto parts factory exhaust gas can be used: pretreatment + zeolite rotor concentration + catalytic combustion or pretreatment + zeolite rotor concentration + RTO thermal storage incinerator and so on.
>
Guangdong Public Security Bureau No. 44190002006305
